Kitchen Mixer Grinder Blades: Problems and Solutions

Those who have ever used a mixer grinder at home know that after prolonged use, the appliance can lose some of its lustre. Mixer blades that aren’t as sharpened could be to blame. Over time and with continued use, the blades may lose their sharpness, resulting in less than flawless operation.

However, there are a number of methods available for honing mixer blades on your own. This article should be helpful if you wish to gain more information about mixer grinder blade problems and solutions.

 

Table of Content

• Why Your Mixer Grinder Blades Wear Out
• 6-Steps to sharpen your Mixer Grinder Blades
• Final Thoughts
• Frequently Asked Questions (FAQs)

 

Why Your Mixer Grinder Blades Wear Out

It is possible for you to have instances in which the food does not come out as finely ground as you would like it to be. The blades of the blender have become dull over time and as a result the mixture is not as smooth as it should be. You can try grinding one teaspoon of rock salt using a few different rotations in order to make it ready for immediate use. This will give the blunt blades a finer edge than they had before.

If this does not work, the blade will need to be replaced. You can do it yourself with the spanner included with the new mixer grinder. One hand is sufficient to hold the coupler on the underside of the jar.

To remove the blade, turn the spanner counterclockwise. Place the second blade in place and rotate it counter-clockwise until it is securely locked.

However, in the long run, you will need to schedule an appointment with an expert in servicing and get them replaced.

 

6-Steps to sharpen your Mixer Grinder Blades

Step 1: Remove the mixer from its stand

The first step is to remove the mixer jar from the base and turn off the power to the appliance. Ensure there is no electricity flowing through the gadget in any way. After turning off the power, let it sit for a while before removing it.

 

Step 2: Clean the jar

Before you can sharpen the blades, you’ll need to give the jar a thorough cleaning. Cleaning it in this way will remove any dirt, leftover food, or other contaminants. This is useful while sharpening.

You can clean it by immersing it in a sink full of hot, soapy water. Take it out after a while and dry it thoroughly.

 

Step 3: Take out the knife blade

As soon as you’re done washing your hands, take the blade out of the jar’s bottom. The blades can be taken off by turning them counterclockwise. The blades will come off easily in your hands if you do this. At this point, you should have the blade, the ring or seal, and the base all in individual containers.

 

Step 4: Clean the knife blade

Mixer blades must be washed as the next step in the process of honing them. Warm soapy water is fine, but be careful of the sharp edges as you wash it. If you want to prevent injuries, you should put on some gloves.

 

Step 5: Hone the Blade

To restore the blade’s edge, run it along a sharpening stone at an angle that is consistent with the original cutting edge. Always keep the blade pointed away from you to reduce the chance of an accident or injury. Sharpen each edge separately once the first one is finished. You can also use rock salt alternatively to sharpening stones.

 

Step 6: Reassembling the Blender to Its Original Form

After you have finished honing the mixer’s blades, you can put everything back together and give it a test run. The mixer is now functioning normally, as you can see.

 

After reading this, you should be able to sharpen your mixer blades at home and avoid ever having a problem with your mixer again. However, if you ever need assistance with your mixer, such as when your juicer mixer grinder stops working, you can always contact Kutchina experts.

 

Final Thoughts

You can see how challenging and difficult it is to sharpen the blades of your mixer grinder.  Except if you enjoy handling blades, we do not recommend these techniques. In case you’ve never worked with a sharpening stone before, it’s best to seek the assistance of a professional.

 

Now that you know what you’re doing and how to sharpen the blades on your mixer grinder, it’s time to put your knowledge to use.  A sharpened mixer blade will certainly make short work of any grinding or mixing task. The same methods can be used to sharpen the blades of a blender or food processor. The blades, especially in the dry grinding jar, need to be monitored by the person in-charge of the kitchen.

 

Mixer grinder is one of the most fundamental kitchen appliances that is a must for every Indian kitchen. Mixer grinders outshine other kitchen appliances such as stainless steel food processors, standard depth fridges, counter depth refrigerator, french door fridges, bottom freezers, counter depth fridges, gas stoves, roti makers, microwave ovens, induction cooktops, sandwich makers, top freezers, and standard depth refrigerators, mainly for one single reason – MIXER GRINDERS CAN PERFORM VERSATILE TASKS.

Kutchina is an emerging name in Indian home appliances. It’s now very convenient for anyone in India to avail aftersales servvices for their purchase. Get in touch with us to discuss your options for the best mixer grinders in India.

 

 

Frequently Asked Questions (FAQs)

 

Do I Need Any Special Tools To Sharpen the Mixer Grinder blades?

Blades for mixer grinders can be sharpened using tools you probably already have in your home such as sand paper, rock salt or aluminium foil. If you know how to resharpen mixer blades, you can do blade sharpening with ease. All you need to sharpen mixer blades is common cleaning supplies like dish soap, a drying cloth, and a sponge. Wearing safety gloves will help you handle the blades without hurting yourself.

 

How can you tell if the blade of the mixer grinder has worn out?

If the ingredients are no longer coarsely ground, it is time to replace the blade. However, before you go ahead and replace it, you should try sharpening it with rock salt. Incorporate a teaspoon of rock salt into the jar and activate the mixer grinder. Repeat the procedure a few times, and you will observe that the blade has become somewhat sharper.

 

How do I keep my mixer blades sharp?

Step 1: Turn off the power and take the jar out.

Step 2: Clean the jar.

Step 3: Take off the blade.

Step 4: Clean the blade.

Step 5: Get the blade sharp.

Step 6: Put the blender back together.